Capacity 1000 – 20000 kg
The TCH horizontal lifting gear consists of two clamps with a two-legged chain sling. It is especially suited for the transport of single plates with a minimum thickness of approx. 5 mm as well as for plate bundles.
The two-legged version is appropriate for normal sized plates. For extra large or long plates, it is recommended to use two sets of the two-legged lifting gears in conjunction with a spreader beam.
In the standard version, the lifting clamp is suitable for plates up to 1500 mm width. Lifting gears with longer chains for larger plate widths are available on request. The capacity applies to a pair of lifting clamps. Single clamps are also available.
DOWNLOAD:
Brochure
Operating Instructions
Spare Part Manual
Info
The angle from the vertical must not exceed 45°!
Technical data Tigrip® Horizontal lifting gear TCH:
| Model | Art.-No. | Capacity1 | Jaw capacity | Weight2 |
|---|---|---|---|---|
| kg | mm | kg | ||
| TCH 1,0 | N50501517 | 1000 | 0 - 50 | 13.0 |
| TCH 2,0 | N50501511 | 2000 | 5 - 32 | 17.7 |
| TCH 4,0 | N50501512 | 4000 | 5 - 50 | 31.0 |
| TCH 6,0 | N50501513 | 6000 | 5 - 75 | 69.0 |
| TCH 8,0 | N50501514 | 8000 | 5 - 75 | 72.0 |
| TCH 10,0/1 | N50501515 | 10000 | 5 - 100 | 93.8 |
| TCH 10,0/2 | N50501516 | 10000 | 50 - 150 | 108.6 |
| TCH 15,0/1 | N4300012878 | 15000 | 5 - 100 | |
| TCH 15,0/2 | N4300012879 | 15000 | 50 - 150 | |
| TCH 20,0/1 | N430014489 | 20000 | 5 - 100 | |
| TCH 20,0/2 | N4300014491 | 20000 | 50 - 150 |
1 Per pair, up to an angle of 45° from the vertical
2 Approx. weight for 2 single clamps with a chain length = 1m