Tigrip® Plate clamp with hinged hook ring and safety lock TBS & TBS plus

Capacity 1.000 – 10.000 kg

The TBS plate clamp with hinged hook ring can be used for the safe handling of plates at various angles. It can lift plates from the horizontal and put down in the vertical or alternatively lift it over the edge by gripping it from the side. The hinged hook ring ensures adequate clamping force in every position. Depending on the angle of usage capacity restrictions have to be taken into account, as shown in the diagram below.

The hinged hook ring has the added advantage of providing enough clamping force to hold a plate safely. Even when transporting large-sized plates with the 2-legged lifting system slipping of the load and damage to the clamp is avoided.

In addition to transporting plates, this clamp is suitable for turning steel structures and welded constructions.

Info

The surface hardness of the material must not exceed HRC 30/Brinell 300.
The min. load is 10 % of the nominal WLL!

 

Technical data Tigrip® Plate clamp with hinged hook ring and safety lock TBS and TBS plus:

Model	EAN-No.	Capacity	Jaw capacity Z	Weight
	4053981* 4025092*	kg	mm	kg
TBS 1,0 plus	*526157	1000	0 - 20	4.6
TBS 2,0 plus	*526195	2000	0 - 32	14.3
TBS 3,0 plus	*526201	3000	0 - 32	14.3
TBS 4,5	**550352	4500	0 - 50	34.4
TBS 6,0 S	**550383	6000	0 - 50	38.0
TBS 6,0 L	**551250	6000	50 - 100	42.0
TBS 8,0 S	**552578	8000	0 - 50	39.0
TBS 8,0 L	**557528	8000	50 - 100	42.4
TBS 10,0 S	**552516	10000	0 - 50	68.0
TBS 10,0 L	**557542	10000	50 - 100	80.0