Hand-tighten with wrench or spanner until flush to the contact surface, which must be flat and level. Check correct screw and thread sizes, and screw-in length. For blind holes the thread depth must be at least 1.1x screw-in length.
As minimum screw length we recommend:
- in steel: 1 x d
- in cast iron: 1.25 x d (for casting strengths < 200 MPa min. 1.5 x d
- in aluminium: 2 x d
- in aluminium-magnesium alloys: 2.5 x d
DOWNLOAD:
Brochure
User instructions
Lifting point Load capacity table:
Sling type | |||||||||
---|---|---|---|---|---|---|---|---|---|
Inclination angle | 0° | 90° | 0° | 90° | 0°-45° | 46°-60° | 0°-45° | 46°-60° | |
Typ | Thread | Load capacity t | |||||||
CM08SEB-1018 | M10 | 0,90 | 0,45 | 1,80 | 0,90 | 0,63 | 0,45 | 0,95 | 0,68 |
CM08SEB-1218 | M12 | 1,00 | 0,50 | 2,00 | 1,00 | 0,70 | 0,50 | 1,05 | 0,75 |
CM08SEB-1620 | M16 | 2,00 | 1,12 | 4,48 | 2,24 | 1,57 | 1,12 | 2,35 | 1,68 |
CM08SEB-2030 | M20 | 4,00 | 2,00 | 8,00 | 4,00 | 2,80 | 2,00 | 4,20 | 3,00 |
CM08SEB-2430 | M24 | 6,30 | 3,15 | 12,60 | 6,30 | 4,41 | 3,15 | 6,62 | 4,73 |
CM08SEB-3035 | M30 | 10,60 | 5,30 | 21,20 | 10,60 | 7,42 | 5,30 | 11,13 | 7,95 |
CM08SEB-3650 | M36 | 11,80 | 8,00 | 32,00 | 16,00 | 11,20 | 8,00 | 16,80 | 12,00 |
Bei unsymmetrischer Lastverteilung gelten für die 2- und 3-/4-strängigen Anschlagmittel die Tragfähigkeiten für 1-strängig bei 90°. Bitte beachten Sie die erlaubten Einsatztemperaturen in der Betriebsanleitung!